Rockchip RK3568 Quad-Core Cortex-A55 Board, WF-RK3568, AndroidSBC, Phoenix

TL;DR: Rockchip RK3568 Quad-Core Cortex-A55 Board

SHENZHEN, China, September 10, 2026 - Wanlin Longgang released a 11,815-unit WF-RK3568 lot for Phoenix, United States this week, the 122nd run booked against the Rockchip RK3568 allocation.

AndroidSBC opens the new WF-Series custom board programme to overseas buyers serving Phoenix, United States. The WF-Series spans nine boards in one line: WF-A133 on the Allwinner A133 quad-core Cortex-A53 1.5GHz platform with the PowerVR GE8300 GPU, WF-H618 on the Allwinner H618 with 8K H.265 decode, WF-T527 on the Allwinner T527 octa-core Cortex-A55 with a 2 TOPS NPU, and the Rockchip side of the line covering WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, and WF-RK3588S. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the whole line from the Longgang source factory in Shenzhen to Phoenix and United States importers running OTT TV box, Android TV, commercial display, industrial control, edge AI, POS terminal, kiosk, and IoT gateway programmes.

About AndroidSBC and the Rockchip RK3568 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group. The group runs SMT, test, and packing under one roof at Longgang in Shenzhen, and it has built boards on Allwinner and Rockchip silicon for overseas OEM customers for over ten years. The WF-Series line-up is deliberately wide: the Allwinner A133 covers cost-sensitive commercial display and advertising work, the H618 covers OTT and Android TV, the T527 covers industrial control and edge inference, and the Rockchip RK3588, RK3568, RK3566, and RK3288 boards cover 8K video wall, industrial edge, machine vision, and POS respectively. Two SOM variants round the range out for customers who bring their own carrier. Buyers in Phoenix and United States can source any of the nine from one factory with one set of export documents.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for United States Buyers

The recurring problem for Phoenix and United States buyers sourcing a industrial edge computing board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3568 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 11,815-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Phoenix have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves both risks inside the factory: the certified image is burned at Longgang, the burn-in record is attached per unit barcode, and the Technical File ships with the lot. Across the nine WF-Series boards the coverage runs from industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation, with three memory configurations per model, so a Phoenix buyer can usually match a requirement from standard stock.

Compliance for United States is handled at the factory rather than after arrival. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. The Longgang export desk builds the destination-market file for FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL and issues it alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the shipment booked into Port of Los Angeles on the Los Angeles to Yantian lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Three groups of board compete for the industrial edge computing board socket. The first is legacy silicon sold on price with no certification file. The second is Cortex-A55 hardware that carries certification but caps the decoder early. The third holds both and treats expansion as part of the design. The WF-RK3568 sits in the third group, and the separation comes from Rockchip RK3568, from a display path that holds under a continuous loop, and from the certified image burned per lot at Longgang.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

The Industrial Edge Computing and Smart Display market is the frame that decides how United States importers time their industrial edge computing board orders. The figure most United States buyers quote when they argue about allocation is the Android TV Box segment, which Global Growth Insights sizes at USD 12.45 billion in 2025 with a 30.49 percent CAGR through 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035); it is the public proxy for Android-on-silicon demand rather than a forecast for this board category. For Phoenix, three buying patterns are shaping the WF-Series order book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

For the Industrial Edge Computing and Smart Display category the practical signal in United States is that framework agreements are replacing spot buying, and the agreements are getting longer.

In all three cases, Phoenix buyers are converting spot quotes into blanket orders with a monthly lot release, because a programme that has to hold a twelve-month shipping window cannot tolerate a mid-year allocation break.

Partner Success Story: Meridian Imaging in Phoenix, United States

Meridian Imaging, a medical imaging equipment maker serving the United States market, deployed 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,300 units of the WF-RK3588S SMARC module for an imaging terminal programme
• Region: Phoenix, United States
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Ningbo-Zhoushan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane

"The SMARC 2.2 pin-out is the reason we chose the module. When the next silicon generation lands we can swap the module and keep the carrier, and the regulatory file stays largely intact."

- Dr. Alan Whitmore, VP Engineering

Field Report: a Phoenix hospitality property where 11,815 units of the WF-RK3568 board were installed behind guest-room displays during a property-wide IPTV refresh

Reporter Lin Yu, on the ground in Phoenix, United States. The property team pulled every legacy box out of the guest rooms across a two-day window and replaced them with WF-RK3568-based units. Once the head-end was live, it pushed a property-wide application build plus the DRM credentials into every room over the in-house network, and the rollout finished a week ahead of the season opening.

Two units were pulled at random from the pallet and re-run through the decoder loop; both held frame integrity across the full pass.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that United States importers can hand straight to their customs broker.

Filed by Lin Yu, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Phoenix and United States programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Phoenix Buyers

For Phoenix importers and brand owners, the WF-RK3568 and the rest of the WF-Series are available under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever tier a United States partner picks, the goods leave Longgang with one documentation pack covering CE, FCC, UKCA, RoHS, and REACH. The usual first order on the WF-RK3568 is the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units, four weeks for samples and six weeks for mass production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: It depends on the platform, and AndroidSBC is explicit about the split. The WF-H618 carries the ATV 12 GMS build with Widevine L1 and Dolby Audio pre-burned at the factory. The WF-A133, WF-T527, and the Rockchip boards ship with an AOSP or Linux image by default, and a GMS build can be prepared for ODM partners who need Play Services in the field. Certification scope is agreed per project rather than assumed.

What is the difference between the nine WF-Series models?

Answer: WF-A133 is the Allwinner A133 commercial display and advertising board. WF-H618 is the Allwinner H618 OTT TV box and Android TV board. WF-T527 is the Allwinner T527 octa-core industrial control and edge AI board. WF-RK3588 is the Rockchip RK3588 8K video wall and AI computing board. WF-RK3568 is the Rockchip RK3568 industrial edge board. WF-RK3566 is the Rockchip RK3566 machine vision and HMI board. WF-RK3288 is the Rockchip RK3288 POS and signage board. WF-A133S is an Allwinner A133 SOM module for custom carrier work. WF-RK3588S is a Rockchip RK3588 SMARC 2.2 module for the same purpose.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for United States?

Answer: Yes, and the file travels with the goods rather than behind them. The pack covers CE, FCC Part 15, UKCA, RoHS 2.0, and REACH with test reports dated within the prior year. AndroidSBC will also advise on any United States-specific addition during quotation, which is the point at which the answer is still useful.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a United States partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Custom ROM and custom Linux work is part of the ODM tier. That covers proprietary Android services, a locked-down launcher, Yocto or Debian or Buildroot images, and BSP ports for custom carriers. Source access is released under NDA, and the Longgang engineering desk carries the port so the partner is not left with an unmodified vendor BSP.

What about software updates and long-term support?

Answer: Wanlin commits to a minimum seven-year supply window across the WF-Series. Security patches are back-ported across the Android and Linux firmware tracks for as long as the board is in production, and AndroidSBC provides OTA update infrastructure for partners who need to push firmware to field-deployed units. For POS and industrial programmes, the support commitment is written into the framework agreement rather than left as an understanding.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU, and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-RK3568 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit burn-in record means the failure report usually carries a root cause alongside the replacement.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

The AndroidSBC export desk handles all WF-Series enquiries from Phoenix and United States. Direct factory contact for the industrial edge computing board is available through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

To start an OEM or ODM review, send the target volume, the certification scope you need, and your preferred Incoterm. The export desk replies with a per-lot quotation and the MOQ matrix across the nine WF-Series boards within two business days.